29 View results of last archive operation (if any)
31 Select all files in %s
32 Deselect all files in %s
34 View files in %s
35 Run Install or Setup Program in %s
41 Sort files by type (extension)
43 Close %s
45 Set configuration options
46 Set location of external programs
47 Exit WinZip
63 Create icons for files in %s
65 Make .EXE file from %s
66 Virus Scan files in %s
76 Try to use existing window when WinZip is started
77 Display usage tips
83 Information about %s
84 Save WinZip settings on exit
85 Move %s to another drive or folder
86 Test %s
87 Copy %s to another drive or folder
88 Rename %s
89 Delete %s
100 Set default folders for Extract, Add, and Start-Up
101 Mail entire archive
103 Sort files by compressed size
104 Sort files by compression ratio
105 Sort files by path (folder)
106 Toggle "Always On Top" attribute
107 Configure WinZip File Manager Interface
108 Describe how to create, open, and work with archives
109 Display ordering information
110 Configure WinZip Explorer Interface
301 Dropped files are not accepted while the Drop dialog box is active
302 Delete CheckOut folder %s and program group "%s"? Please press F1 for help.
303 Insufficient memory to drop file(s).
304 To create self-extracting archives use the "Make .EXE" file menu entry
305 Invalid fileid: %s
306 %s is a folder
307 Could not open %Fs. It does not appear to be a valid archive
308 List Box Full
309 please
310 Please press F1 for help.
311 WinZip
312 Could not change to %s - closing %s
313 Cannot start WinZip! WZ.DLL, WZ2.DLL, WZ.COM, WZ.PIF, or WINZIP.HLP not found in same folder as WINZIP.EXE
314 File %s not found
315 File %s not found in your path
316 Incomplete fileid. If either a drive letter or a folder is specified then both must be specified
317 Could not create temp files on drive %c
318 %s not installed in Options/Program Locations dialog box
319 Windows error %d running %s
320 WinZip is waiting for %s to finish.\nChoose OK to activate %s\nor Cancel to stop waiting
321 File %s has been changed since it was extracted.\n\nDelete this file?
322 File %s has been changed since it was extracted.\n\nUpdate archive with this file?\n\nPlease press F1 for help.
323 Delete %s?\nPlease press F1 for help.
324 File dropped: %s
325 Files dropped: %d
326 Cannot create or add to ARC, TAR, gzip, or compressed files
328 No files selected in list box
329 Add files selected in listbox?
332 Registered WinZip users: to upgrade the registered version you must use wzptch*.exe patch file, NOT this shareware evaluation version.\n\nDo you want to continue install the shareware evaluation version now?
333 Create "WinZip" program group and icons?
334 Out of memory
335 File does not appear to be a valid ARJ archive
336 View Last Output
337 Text truncated at first binary zero. Double click on this file in the main listbox to view the file with the associated program.
338 Selected text successfully copied to clipboard
339 Error opening file for viewing
340 Not enough memory to hold file for viewing
341 Error reading file for viewing
342 View:
343 The disk file %s already exists.\nShould WinZip overwrite it so that\nthe file in the archive can be viewed?
344 WinZip does not work with the old LHARC program, it requires the newer LHA program
345 in drop-down list
346 Sorry, Norton Anti-Virus support requires DOS 4.0 or later
347 WinZip requires a more recent version of NAVW
348 Filename must be %s. Drive and folder are optional
349 Are you sure you want to delete the entire archive %s?
351 Extract
352 Open Archive
353 New Archive
354 Cannot create new ARC, TAR, gzip, or compressed files
355 Archive &Name:
356 List Files of &Type:
357 Wildcards not allowed in fileid %s
358 Could not create temp folder
359 Error building BAT file
360 DOS commands
361 Error deleting files in %s
362 IO Error
363 File does not appear to be a self-extracting archive
364 Invalid or non-existing folder name: %s
366 Bad file name or file specification
367 Error in ZIP file
368 No files found for specified action
369 File not found
371 ZIP file is read-only and can not be modified
372 Bad or illegal parameters specified
373 Too many files
374 Warning error - View Command Output for details
375 Unexpected EOF in ZIP file
376 CRC error, insufficient disk space, or files already exists
377 Fatal error. Process terminated without transactions
378 Failed to write temporary files in the archive
379 Warning: e.g. file not found, negative answer to prompt
380 Fatal error.
381 CRC error (header or file CRC error)
382 ARJ-SECURITY error or attempt to update an ARJ-SECURED archive
383 Disk full or write error
384 Cannot open archive or file
385 Simple user error (bad parameters)
386 Unknown error %d
387 Error %u:\n%s
388 Unrecognized error
390 DOS commands
391 Icon maximum is 50
392 No folder specified
393 Windows error %d running "%s".
394 \nPossible cause: the "Better Windows than Windows" support in the initial release of OS/2 2.0 does not allow Windows programs to run DOS programs.\n
395 DOS command too long
396 WinZip running %s
397 the %s command
398 An unexpected system error occurred while running %s
399 Error opening output fileid
400 Error reading file for viewing
401 Aborting operation - WinZip requires ARJ version 2.3 or later
402 Could not create temp files in root of drive %c:. Use WZTMP= to specify a different drive
403 Error communicating with Program Manager
404 ARC extraction
405 Could not change to %s
406 Error extracting
407 Bad header
408 Cannot read file or unexpected end of file
409 Header CRC error
410 Cannot open file: it does not appear to be a valid archive. If this file is part of a ZIP format backup set, insert the last disk of the backup set and try again
411 This is the first disk in a backup set. Insert the last disk of the backup set (required by PKUNZIP) and try again
412 This ZIP contains files archived with PKZIP 2.0. PKUNZIP 2.0 is needed to extract files from this archive
413 ZIP Central Directory spans disks - run PKUNZIP from command line
414 Could not open file
415 Searching ...
416 Invalid archive folder. Running PKZIPFIX may correct this problem
417 Invalid CheckOut folder. Cannot specify current folder, temp folder, Windows folder, or root folder
418 PKZIP disk spanning will replace all files in %s. Continue?
419 Caution
420 DOS 3.2 or later needed to span disks
421 Press ESC key to exit menu mode
422 You must open an archive before using this menu entry
423 Name
424 Date
425 Time
426 Size
427 Path
428 Ratio
429 Packed
430 Choose "New" to create or "Open" to open an archive
431 Create File Manager associations for ZIP, LZH, ARJ, and ARC files?\nPlease press F1 for help.
432 Default Association (in Program Locations dialog box)
433 No file selected for viewing
434 &Associated Program
435 None (Prompt When Necessary)
436 Open the selected archive
437 Could not create folder %s
438 Add With Password
439 No fileid specified
440 CheckOut group "%s" cannot be deleted now. You must close WinZip before closing Windows to delete the CheckOut group.\n\nContinue closing Windows?
441 Error getting attributes of file %s - probable cause: file no longer exists
442 The red light on the right of the WinZip status line is on when WinZip is busy (for example, while busy archiving files). The green light is on when WinZip is not busy.
443 Creating CheckOut group ...
444 PKZIP does not allow the use of disk spanning with the Update and Freshen options.
445 Spaces are not allowed in passwords when working with ARJ files
446 I/O error for file %s. Possible causes include disk full and a read-only or locked disk
447 Registration information from previous version of WinZip saved.\nWinZip installation continues ...
448 Aborting operation. Temporary drive %c is almost full.
449 Virus scanning operation complete.\nPress F1 for help.
450 Warnings were issued. View warnings and other messages?
451 Incorrect version of %s in use. Verify the correct version of %s is installed, exit Windows, and try again
452 When working with %s files the "%s" operation requires the %s external program. This program is not installed or improperly installed
454 Another instance of WinZip is busy zipping or unzipping. Please wait until this task is complete and re-try the operation
455 Browse
456 No files in archive match the specified files
457 File added to archive without folder information. Please press F1 for help.
458 Characters with ASCII values 128 or higher are not allowed in passwords
459 Could not delete %s
460 Multiple files were dropped, and one or more is an archive. Should all dropped files be added?
461 Adding file: %s
462 Adding %d files
463 Cannot open %s. File does not exist. Create new file? Please press F1 for help.
464 Cannot create %s. File already exists. Open existing file? Please press F1 for help.
465 You must add files before using this menu entry
466 No programs, documents, or special files; no icons created
467 Due to Windows limitations some selected filenames may be ignored
468 &Always On Top Ctrl+Y
469 Skipping %Fs. This file is in use by the system and cannot be safely extracted at this time. Please press F1 for help.
470 For hints on using WinZip with Norton Desktop see the section titled "Norton Desktop for Windows" in the Details section of the online help or press the F1 key now.
471 For information on opening ZIP files by double clicking in Central Point Desktop File Manager windows see the section titled "Hints and Tips" in the online help.
473 Could not create folder %s\nA file with same name already exists
475 Default Assocation must be specified
476 %s does not appear to be an MS-DOS executable. PKZIP and PKUNZIP 2.04g, the latest version available at the time of the release of this version of WinZip, are both MS-DOS executables.
477 WinZip is waiting for %s to finish.
478 &Activate %s
480 Uninstall complete.\n\nThe file %s will be automatically deleted when you next start Windows.
481 Cannot uninstall - file %s is in use by another process.
482 WinZip is already running. It must be closed before uninstalling.
483 The "Uninstall WinZip" procedure will:\n\n* Remove WinZip 6.1 files from the %s folder\n* Remove the WinZip program group\n* Remove WinZip INI entries/files\n\nDo you want to continue?
484 error %u loading %s
490 The Install feature cannot be used to install WinZip. Please see the README.TXT file for installation instructions
491 WinZip will extract all files to a temporary folder and run the %s program
492 Important: for an easy uninstall be sure to run only the programs being installed before you continue working with WinZip.
493 Uninstall feature is disabled. WinZip's uninstall feature currently requires Windows 3.1 or Windows for Workgroups.
494 WinZip's UNINSTALL feature tracks ALL changes made by any program. As a result, only one task should track install changes at one time. Another WinZip task is currently tracking install changes
495 When %s completes and you have tried the software press the OK button.
496 When %s completes press the OK button to return to WinZip.
497 %s is still running and must be closed before uninstalling. Press OK to continue waiting or Cancel to stop waiting. If you Cancel you will not be able to uninstall.
498 Extracting to temporary folder %s
499 %s is not a Windows program so an uninstall will not be possible. Continue install?
500 Could not create folder
501 Could not make specified folder the current working folder
502 Invalid archive folder
503 Unknown archive format. Please use extension (e.g. .ZIP)
504 Information
505 %s %%s &to:
506 Filenames are the same
507 Invalid file name. File name cannot include folder or drive information or a file type
508 Archive does not contain an install program
509 No filename specified
510 yes
511 no
512 ARC (or compatible)
513 Note: this is a pre-release version of WinZip 6.1. Please see the whatsnew.txt file for a list of changes in this version.
515 Temp folder must contain a fully qualified path (including a drive and folder)
516 Could not create temporary file in temp folder
518 WINZIP.EXE damaged, please reload from distribution disk
519 File %s is in use by another process.\nCannot delete folder %s
520 bad date
521 Error copying file
522 Copy
523 Move
524 %s complete
525 bytes
526 KB
527 Rename failed
528 Existing WinZip window is busy or has an active dialog box. Do you want to start another WinZip session?
529 Filename of archive is not complete. Be sure to specify a valid filename
530 Current Folder %s
531 "Install From" folder is %s
532 Cannot make self-extracting file out of archive that spans disks
533 You are about to uninstall WinZip.\n\nIn order to run WinZip again, you will have to re-install the program.\n\nAre you sure you want to continue?
534 \n\nFolder %s contains files that are not part of the WinZip 6.1 distribution package and were therefore not deleted.
535 Uninstall of WinZip canceled
536 You cannot exit WinZip because a dialog box is active.\nSwitch to WinZip first and close the dialog box.
537 M&ail Archive... Ctrl+M
538 Copying ...
539 Moving ...
540 Mailing ...
543 Files in folder %s were not deleted
544 Folder %s already exists. If you continue all files in this folder will be deleted.
545 Group %s already exists. If you continue all icons in this group will be deleted.
546 Do you want to continue?
547 Replace current option and folder settings with the original distribution default settings?
548 "File not found" error running "%s". Probable causes include: file was moved, file was deleted, or a required DLL or other component is missing.
549 Could not save configuration info for possible uninstall. Continue Install?
550 %s no longer exists ... closing archive
551 Caution
552 At the time WinZip was released %s did not support automatic scanning. Continue anyway?
555 Folder name contains a space character
556 This dialog box does not support UNC names in this operating environment
557 Cannot add files - current folder does not match folder in dialog box - check for conflict with COMMDLG.DLL extension utilities
558 Could not start required thread
559 Problem creating process
560 WinZip internal error in file %s line %d
561 error loading resource: %s\n
562 \n*** Truncated at 32K by WinZip ***
566 Add (and Replace) Files
567 Freshen Existing Files
568 Update (and Add) Files
569 &Add
570 Fr&eshen
571 &Move
572 U&pdate
573 Normal
574 Size
575 Speed
576 (removable media only)
577 Auto
578 Maximum (slowest)
580 Fast
581 Super Fast
582 None
583 No Spanning
584 Span: no format or erase
585 Span: wipe disk (erase files)
586 Span: quick format (hi density)
587 Span: full format (hi density)
588 Span: quick format (low density)
589 Span: full format (low density)
590 (not available)
591 Extracting to %Fs
592 Use Path: %s Overlay Files: %s
593 Testing ...
594 Action:
595 Deleting
596 Delete
597 Recurse: %s Save Full Path: %s
598 I/O error on header
599 Invalid header
600 Cannot process an ARC containing folders
601 Unknown archive type. Please use New or Open buttons, set a default archive type in the Configuration dialog box, or use a standard extension (e.g. ".zip")
602 This archive contains files with long filenames, but you are using an external archiver that does not support long filenames. Therefore, some operations involving external programs may not work on this archive
603 Quote character not allowed in Add dialog box. Use the drag and drop interface to add filenames that include spaces
625 Norton AntiVirus is already running. Please close it and try again
626 Another program has exclusive access to this file. Please try again later.
627 If you close Windows now some files will be left in your temp folder. If you close WinZip before closing Windows they will be automatically deleted.\n\nContinue closing Windows?
628 Reading Folder
629 Move Files
631 Please enter the full name of the file contained within the archive %s.%s. For example, if the contents are a DOC file, a recommended filename is %s.DOC.
632 Please specify the name of a file contained in %s, not the name of %s.
633 &Add Dialog
634 Create In:
635 Show Types:
636 OK
637 Registration number
638 (32-bit) for Windows
639 &Quit
640 &Ordering Information
641 &Quit now
642 error removing %s
643 File size 0: %s
644 WinZip parameter validation error
645 corrupted input -- file name too large
649 Uninstall WinZip
650 Online Manual
651 What's New
652 could not find %s
653 PKZIP 2.04C cannot create ZIPs on your A: drive if the current drive is A: unless the PKTMP= environment variable is set. Thus, the ZIP operation may fail. Both PKZIP 2.04E and PKZIP 2.04G correct this bug.
654 Incomplete or incorrect information
655 For full access to WinZip's shell and File Manager interface, WinZip must be properly associated with ZIP files.
656 However, a different copy of WinZip in a different folder or with a different filename is associated with ZIP files.
657 However, WinZip is not currently associated with ZIP files.
659 \n\nAssociate WinZip with ZIP files now?
660 Diagnostic information:\n\nFull filename of current WinZip: %s\nCurrent .ZIP Association: %s\nCurrent Registry value for .ZIP key: %s\n\nPlease press F1 for help.
661 Under NT you must install WinZip as Administrator to use the full Explorer interface
662 Some of WinZip's most useful features require that WinZip is associated with ZIP files and other archives. Are you sure you want to turn this option off?
663 Add With &Wildcards
664 Freshen With &Wildcards
665 Move With &Wildcards
666 Update With &Wildcards
667 Add &from:
668 Add
669 Selected %u file%s, %s
670 s
671 Total %u file%s, %s
672 s
673 All Rights Reserved
674 Expl&orer Configuration...
675 %s %s?\n\n(Use the "%s" button to avoid this message)
677 Possible problem detecting disk changes. Please press the F1 key for information on this problem.
678 &Register
679 WinZip File
680 Extract To
681 %s is still running. It must be closed if you want WinZip to clean up temporary files. Press OK to continue waiting or Cancel to stop waiting.
700 name in zip file repeated:
701 first full name:
702 second full name:
703 replacing old
704 replace: could not delete
705 copying
706 replace: could not rename
707 replace: can't open
708 %s ZIP file
709 fcopy: write error
710 Can't create output file: %s
711 Can't open input file: %s
712 Extracting
713 UnShrinking
714 Expanding
715 Exploding
716 Inflating
717 unknown compression
718 ZIP damaged: file %s: Bad CRC %08lx (should be %08lx)
719 Invalid Zipfile Header
720 Insufficient memory
721 Could not create %s - aborting extract operation
722 Testing
723 Extracting
724 Error writing to %s. Possible cause: disk full
725 Error reading %s. Possible cause: bad disk
726 was deleting moved files and directories
727 Could NOT create/update ZIP file.\nProbable cause: disk full.\nNew ZIP file left on disk as %s
728 Error: %s (%s)
729 attempting to restore %s to its previous state
730 Warning: %s%s
731 name not matched:
732 cannot repeat names in zip file
733 not found or empty
734 was processing list of files
735 allocating temp filename
736 updating %s
737 was zipping %s
738 could not open for reading:
739 will just copy entry over:
740 was copying %s
741 deleting %s
742 was adding files to zip file
743 Adding %s
744 zero-length name for entry #
745 bad extended local header for
746 bad compressed size with extended header
747 extended local header not found for
748 incorrect compressed size
750 Output file size does not match size in header
751 File not expanded: you need a more recent version of LZEXPAND.DLL for this file
8001 No Zip file selected
8002 No Folder set
8003 Do you want to add the folder %s to your Favorite Zip Folders?
8004 WinZip Wizard
8005 Selected File is not a valid Zip File
8006 The temporary files have been removed.
8007 Searching for Zip files...
8008 Click "Install Now" to install the software in\n%s
8009 &Install Now
8013 &Next >
8014 &Unzip Now
8023 No Zip files were found in your Favorite Zip Folders.\n\nClick "Search Local Hard Drives" to automatically search for Zip files, or, if you want look for a Zip file yourself, click "I Know Where It Is".
8024 The wizard will now unzip files in %Fs to the folder specified below. To unzip files to a different folder, click the "Select different folder" button.
8025 This archive is not in the "Zip" format. This version of the Wizard only works with Zip files.
8026 This Zip file is password protected. This version of the Wizard does not handle password protected Zip files.
8027 This Zip file spans multiple disks. This version of the Wizard does not handle spanning.
8028 This Zip file is empty. This version of the Wizard does not handle empty Zip files.
8029 Please click "Back" to select another archive or "WinZip Classic" to work with this archive.
8030 How Installation Works\n\nThe WinZip Wizard will first unzip all the files in your Zip file to a temporary folder. Then it will run the installation program (for example, SETUP or INSTALL).
8031 When the installation completes, the WinZip Wizard will erase the temporary files.
9000 Setup is not complete. Are you sure you want to terminate the installation?
9001 WinZip Setup
9002 You can only drop one file at a time on the Wizard
9003 You cannot drop files while WinZip is busy. Please wait for this operation to complete, then drop the file again.
9004 You cannot drop files onto the Wizard now. Please finish working with this Zip file, then drop the file again.
9005 %s appears to contain a copy of WinZip.
9006 %s contains a setup program.
9008 Press the "Next" button to prepare to unzip %s.
9009 Press the "Next" button to prepare to install %s.
9010 Stop
9011 Close
9012 WinZip Wizard - Install
9013 Click "Install Now" to run the installation program.
9014 The unzip operation is complete. WinZip will now run the installation program. Later, when the Installation program completes, return to the Wizard and it will clean up any temporary files.
9015 Install Now
9016 Please wait for the installation program to complete.
9017 When the installation program is complete click "Next" to work with another Zip file, or "Close" to leave the WinZip Wizard. In both cases the Wizard will remove any temporary files.
9019 WinZip Wizard - Unzip Complete
9020 The unzip operation is complete.
9021 The WinZip Wizard has opened an Explorer Window showing the unzipped files.\n\n
9022 Click the "Next" button to work with another Zip file, or click the "Close" button to leave the WinZip Wizard.
9023 WinZip Classic Required
9024 WinZip Classic is required for this archive.
9025 Select Folder
9026 Searched %d folders, %d files found
9027 Searching %s
9028 Stop searching?
9029 Searched %d folders
9030 WinZip Wizard - Select Zip File
9031 WinZip Wizard - Options
9032 Floppy drives are not allowed in the Favorite Zip Folders
9033 Thank you for installing WinZip!
9034 Please choose whether you want to start with the Wizard or Classic interface.
9035 For a list of new features in this release, please see the "Version History" section of the online help file.\n\nClick "Finish" to start WinZip.
9036 Thank you for installing this free upgrade.
9037 Thank you for installing this evaluation version.
9038 Installation is complete.
9039 Finish
9040 The Wizard will list all Zip files in your "Favorite Zip Folders" by date, so you can quickly find your new Zip files.\n\n\n\nClick "Next" to proceed.
9041 %d folders were added to your "Favorite Zip Folders"
9042 Click "Next" to start the WinZip Wizard, or "Close" to exit.
9043 WinZip Wizard Setup is complete
9044 You have configured WinZip to start with the %s interface but you are now using the %s interface.
9045 Wizard
9046 Classic
9047 The Wizard is busy. Please try again in a moment.
9048 You have 100 Favorite Zip Folders. Keep searching?
9049 Zip Files (*.ZIP)*.ZIP
10002 Please insert the first disk of the Multi-Volume set. \nPress OK when ready or Cancel to abort.\n
10003 Please insert Disk Volume %d. \nPress OK when ready or Cancel to abort.
10004 Please insert Disk Volume %d of %d. \nPress OK when ready or Cancel to abort.
10005 Volume could not be Wiped or Formatted.
10006 Invalid First Disk; Try again.
10007 Please insert the last disk of the Multi-Volume set. \nPress OK when ready or Cancel to abort.
10008 Target Media is NON-Removable and can not be used for a Multi-Volume operation.
10009 The same disk volume can not be used as both the source and destination
10010 ZIP File open error!
10011 ZIP File read error!
10012 ZIP File write error!
10013 UnZIP Alert
10014 UnZIP Warning
10015 -
10016 -
10017 Unexpected end of zip file
10018 Zip file structure invalid
10019 Out of memory
10020 Out of memory
10021 -
10022 -
10023 -
10024 File not found
10025 -
10026 No files to test extract etc.
10027 -
10028 -
10029 -
10030 -
10031 -
10032 -
10033 -
10034 -
10035 -
10036 -
10037 -
10038 -
10039 -
10040 Index out of bounds
10041 Multi-disk archive not supported
10042 -
10043 Error creating output file
10044 Error opening archive
10045 -
10046 -
10047 -
10048 -
10049 -
10050 -
10051 -
10052 -
10053 -
10054 Bad CRC
10055 Application cancelled operation
10056 Encrypted file was skipped
10057 File skipped due to unknown compression method
10058 -
10059 Bad or missing decryption key
10060 Busy can't re-enter now
10061 Can't extract a Volume ID item
10062 Command syntax error
10063 User cancelled this operation
10064 User skipped this operation
10065 Disk full
10066 UnZIP Error:
10067 UnZIP Response:
10068 %s
10069 UnZIP Request:
10070 %s is encrypted and you have not provided the correct password. Continue?
10071 Item %d of %d
10072 Extracting: %s
10073 Testing: %s
10074 returnCount: %d
10075 lpszReturnString:
10076 --- UNZIP Command Incoming Values ---\n
10077 Function: %d \n
10078 lpszZIPFile: %#08lx \n
10079 zInfo: %#08lx \n
10080 lpszFilespec: %#08lx \n
10081 index: %d \n
10082 lpszDestination: %#08lx \n
10083 freshenFlag: %d \n
10084 updateFlag: %d \n
10085 overWriteFlag: %d \n
10086 quietFlag: %d \n
10087 testFlag: %d \n
10088 noDirectoryNamesFlag: %d \n
10089 recurseFlag: %d \n
10090 noDirectoryItemsFlag: %d \n
10091 lpMinorStatus: %#08lx \n
10092 lpMinorUserData: %#08lx \n
10093 lpMajorStatus: %#08lx \n
10094 lpMajorUserData: %#08lx \n
10095 returnCount: %d \n
10096 lpszReturnString: %#08lx \n
10097 decryptFlag: %d \n
10098 lpszDecryptCode: %#08lx \n
10099 lpMessageDisplay: %#08lx \n
10100 lpMessageDisplayData: %#08lx \n
10101 \DYNAZIP.LOG
10102 No valid ZIP file indicated
10103 Problem reading ZIP file
10104 ZIP filename or filespec not provided
10105 ZIP filename or filespec empty
10106 UNZIP command structure not provided
10107 No more items found
10108 Problem opening ZIP file
10109 Need destination path when updating or freshening
10110 Destination path not complete
10111 Destination path must include drive letter
10112 Error allocating memory from local heap
10113 ZIP filename not provided
10114 Can't understand ZIP file structure problem
10115 Specified index is out of range
10116 Re-entry not permitted
10117 UNZIPCMDSTRUCT Size is incorrect.
10118 Can't freshen and update at the same time
10119 Decryption key not provided or too long
10120 Destination path not provided
10121 Unknown function requested
10122 Item list not provided
10123 Index is too high
10124 Problem extracting file(s)
10125 No items match filespec
10126 You are trying to unzip from this ZIP file on top of itself which is not permitted. \nSkipping this item...
10127 wUnzipSubOptions: %#04x \n
10128 %s
10129 Double Quotes mismatched.
10130 Index references Long File Name.
10131 Inconsistent UNZIP_FILETOMEM parameters.
10132 File to Memory: %s
10133 lResv1: %#08lx \n
10134 lResv2: %#08lx \n
10135 lpszExtProgTitle: %#08lx \n
10136 lpRenameProc: %#08lx \n
10137 lpRenameUserData: %#08lx \n
10138 lpMemBlock: %#08lx \n
10139 lMemBlockSize: %ld \n
10140 lStartingOffset: %ld \n
11101 zip file is empty, can't make it as old as latest entry
11102 aborting
11103 was processing arguments
11104 ZIP Alert
11105 ZIP Warning
11106 ZIP Request
11107 ZIP Error
11108 \DYNAZIP.LOG
11132 name not matched:
11135 not found or empty
11136 could not open for reading, will just copy entry over:
11137 could not open for reading:
11138 zip file empty
11139 new zip file left as:
11140 was creating pattern list
11142 encryption not supported
11143 was getting encryption password
11145 nothing to select from
11146 invalid path
11148 invalid date
11149 cannot repeat names in zip file
11150 was processing list of files
11151 missing suffix list
11152 invalid option(s) used with ZIP_DELETE
11154 allocating temp filename
11155 was adding files to zip file
11156 was replacing the original zip file
11157 no such option:
11158 was about to zip
11159 was copying
11160 ZIP Response:
11192 --- ZIP Command, Incoming Values ---\n
11193 Function: %d \n
11194 lpszZIPFile: %#08lx \n
11195 lpszItemList: %#08lx \n
11196 lpMajorStatus: %#08lx \n
11197 lpMajorUserData: %#08lx \n
11198 lpMinorStatus: %#08lx \n
11199 lpMinorUserData: %#08lx \n
11200 dosifyFlag: %d \n
11201 recurseFlag: %d \n
11202 compFactor: %d \n
11203 quietFlag: %d \n
11204 pathForTempFlag: %d \n
11205 lpszTempPath: %#08lx \n
11206 fixFlag: %d \n
11207 fixHarderFlag: %d \n
11208 includeVolumeFlag: %d \n
11209 deleteOriginalFlag: %d \n
11210 growExistingFlag: %d \n
11211 noDirectoryNamesFlag: %d \n
11212 convertLFtoCRLFFlag: %d \n
11213 addCommentFlag: %d \n
11214 lpszComment: %#08lx \n
11215 afterDateFlag: %d \n
11216 lpszDate: %#08lx \n
11217 oldAsLatestFlag: %d \n
11218 includeOnlyFollowingFlag: %d \n
11219 lpszIncludeFollowing: %#08lx \n
11220 excludeFollowingFlag: %d \n
11221 lpszExludeFollowing: %#08lx \n
11222 noDirectoryEntriesFlag: %d \n
11223 includeSysHiddenFlag: %d \n
11224 dontCompressTheseSuffixesFlag: %d \n
11225 lpszStoreSuffixes: %#08lx \n
11226 encryptFlag: %d \n
11227 lpszEncryptCode: %#08lx \n
11228 lpMessageDisplay: %#08lx \n
11229 lpMessageDisplayData: %#08lx \n
11230 wMultiVolControl: %#04x \n
11231 wZipSubOptions: %#04x \n
11232 lResv1: %#08lx \n
11233 lResv2: %#08lx \n
11234 lpszExtProgTitle: %#08lx \n
11235 lpRenameProc: %#08lx \n
11236 lpRenameUserData: %#08lx \n
11237 lpMemBlock: %#08lx \n
11238 lMemBlockSize: %ld \n
11257 Busy, can't re-enter now
11258 Unexpected end of Zip file
11259 Zip file structure invalid
11260 Out of memory
11261 Internal logic error
11262 Entry too big to split
11263 Invalid comment format
11264 Zip file invalid or insufficient memory
11265 Operation interrupted by application
11266 Temporary file failure
11267 Input file read failure
11268 Nothing to do!
11269 Missing or empty Zip file
11270 Output file write failure, possible disk full
11271 Could not create output file
11272 Invalid control parameters
11273 Could not complete operation
11274 File not found or no read permission
11275 Media Error Encountered
11276 Invalid Multi-Volume control parameters
11277 Improper use of Multi-Volume Zip file
11304 specify just one action
11305 zero-length name for entry #
11306 bad extended local hdr for
11307 bad compressed size with extended hdr
11308 extended local hdr not found for
11309 extraneous central hdr signature
11310 local offset in central hdr incorrect for
11311 names differ in local and cnetral hdrs for
11312 made by version %d.%d on system type %d:
11313 needs unzip %d.%d on system type %d:
11314 local flags = 0x%04x, central = 0x%04x:
11315 undefined bits used in flags = 0x%04x:
11316 unknown compression method %u:
11317 starts on disk %u:
11318 unknown internal attributes = 0x%04x:
11319 unknown external attributes = 0x%08lx:
11320 has %d bytes of extra data:
11321 local extra (%d bytes) != central extra (%d bytes):
11322 ZIP file error... missing end signature
11323 multiple disk information ignored
11324 wrong count in end of central dir
11325 central dir size is incorrect
11326 central dir start is incorrect
11327 has a preamble of %ld bytes
11328 garbage at end of zip file ignored
11329 cannot remove parent folder
11330 empty name created while including paths
11331 name not matched:
11332 ct_init: out of memory
11333 block vanished
11334 can not translate EOL in binary files
11380 window allocation
11390 hash table allocation
11391 Item %d of %d
11392 unexpected error on zip file
11393 can't rewrite method
11394 zip error: STORE not supported for pipes or devices
11395 Memory to File
11400 zip diagnostic: GetVolumeInformation failed\n
11401 zip diagnostic: GetFileAttributes failed\n
11402 invalid length
11512 Please insert the first disk of the Multi-Volume set. \nPress OK when ready or Cancel to abort.
11513 Please insert Disk Volume %d. \nPress OK when ready or Cancel to abort.
11514 Please insert Disk Volume %d of %d. \nPress OK when ready or Cancel to abort.
11515 Volume could not be Wiped or Formatted.
11516 Invalid First Disk; Try again.
11517 Please insert the last disk of the Multi-Volume set. \nPress OK when ready or Cancel to abort.
11518 Target Media is NON-Removable and can not be used for a Multi-Volume operation.
11519 The same disk volume can not be used as both the source and destination
11600 ZIP File open error!
11601 ZIP File read error!
11602 ZIP File write error!
11603 Formatting Drive %c:...
11604 Formatting Cylinder %d
11605 Wiping Drive %c:...
11606 Initializing Media...
11700 Processing Item List... Please wait.
11701 INI file is corrupt. Please close WinZip, then delete WINZIP.INI or WINZIP32.INI from your Windows directory.
11702 WinZip Self-Extractor, the optional add-on to create self-extracting ZIP files, is not installed.
11703 Make EXE
11704 WinZip found %d folders named "download" or "dnload" and %d folders with Zip files.
11705 There is a limit of 200 Favorite Zip Folders.
11706 Add %d "download" folders to Favorite Zip Folders
11707 Also add %d folders containing Zip files
11708 Also add first %d folders containing Zip files.
61440 Resize the WinZip window
61456 Reposition the WinZip window
61472 Minimize the WinZip window to an icon
61488 Maximize the WinZip window to the size of the screen
61536 Close WinZip
61728 Return the window to the size and location prior to maximizing or minimizing
